1. Daily cleaning and disinfection
Cleaning: After each use, the residue inside the grinder should be cleaned immediately to avoid material accumulation and bacterial growth. For parts that are in direct contact with the material, such as the grinding chamber, screen, etc., they need to be thoroughly cleaned.
Disinfection: Disinfect the grinder regularly, especially the parts that are in contact with the material, to prevent bacterial growth and cross contamination.
2. Inspection and maintenance of key components
Check wearing parts: Regularly check the wear of wearing parts such as blades and screens, and replace severely worn parts in time.
Check fasteners: Check the fastening between each component to prevent failures caused by looseness.
Check the transmission device: Check whether the transmission belt is installed correctly. If it is damaged, it should be replaced in time.
3. Lubrication and sealing
Lubrication: The shaft of the grinder bears the entire load of the machine. Good lubrication has a great impact on the life of the bearing and the service life of the machine. Check the lubrication points regularly to ensure that the lubricating grease is sufficient and clean.
Seal: Ensure that the sealing performance of the equipment is good to prevent lubricating oil leakage or dust from entering.
4. Regular maintenance and care
Regular inspection: Regularly check the overall operating status of the equipment, including key components such as motors, blades, and screens.
Maintenance records: Establish equipment maintenance records, and record in detail the content, time, problems found, and treatment methods of each maintenance.
5. Safe operation
Wear protective equipment: Operators should wear protective glasses and earmuffs when using the crusher to prevent splashing materials or noise injuries.
Avoid contact with the blade: Do not let your fingers or other objects touch the blade part of the crusher to avoid cuts.
6. Environment and storage
Avoid humid environment: Do not expose the crusher to humid environments to avoid affecting its electrical performance.
Storage conditions: When not in use, the equipment should be stored in a dry and clean environment.
